PREMIUM BATTERY KIT
$349.00
Shipping not included
- PREMIUM BATTERY REMOVABLE 12V
- SLOT PREMIUM BATTERY KIT
- PREMIUM CHARGER 12-24V
Description
Shipping not included
PREMIUM BATTERY REMOVABLE 12V
| STECHNICAL SPECIFICATION | |
| Nominal Voltage | 12V |
| Typical capacity | 300mAh |
| Capacityminimum-maximum | 2700mAh/3050mAh |
| Standard Charge | 1500mAh |
| Cell type system | Panasonic or Sanyo (NiMH) |
| Cell size | Sub C23mm x 43mm |
| temperaturefuse | NTC 20kOhm+Pepi 70°C |
| Chargingtime with AP charger L1410 | Ladestrom 3° max.ca 70min |
| Dimensions(LxHxW) | 106 x 67 x 73,0mm |
| Weight | 720g |
SLOT PREMIUM BATTERY KIT
| IDENTIFICATION | |
| Product category | Adattatore / Adapter |
| Model Name | Discharge Adapter MS Serie |
| Voltage range | 10,8V – 36V |
| Dimensions | 134 x 81 x 33 mm
(5.28in x 3.19in x 1.3in) |
| Weight | 120 gr |
PREMIUM CHARGER 12-24V
The car-charger L2830OEM is development for fast charging of Ni-MH batteries 14,4V- 24V Ni-MH and for Li-Ion batteries 14,4V to 25,2V with capacity up to 5Ah. The charging process is controlled by PIC 16F616 and Atmel Tiny44 microprocessor.
Basic Functions
Charging by 1,6 ± 0,2 Amp to max power 60W
Charging is terminated:
-
- by voltage drop
- by exceeding the temperature limit
- after aprox. 66 minutes of charging
- if the charging current decreased to 400mA
- if battery internal resistance exceeds the limit
> Charging is started after the temperature falls below 41 – 43°C (Temperature resart)
> Low consumption Stand by Mode
Protective functions:
1 Monitoring of power switching transistor
2 Protection against reversing polarity
3 Protection against cycling
4 Limited operation of primary converter
5 Check of the code resistor – relation to batteries circuit
6 Two level check of battery internal resistance
7 Hardware set limit of Li-Ion voltage
| CONDITION INDICATOR LED | ||
| Status | Red | Red-green |
| Power ON | ON | OFF |
| Hot Battery | ON | Red flash |
| Defective battery | ON | Red continuous |
| Charging battery | ON | Green continuous |
| Fully charged battery | ON | Green flash |
| Trickle charging | ON | Green flash |
| Charger defective | Flash | OFF |
| TECHNICAL PARAMETERS | ||
| 12V electrical system (input parameters) | ||
| Nominal line voltage/ tolerance | min. 10,9 V – 16 V ± 0,5 V | |
| Breaking voltage (charging is interrupted): | < 10,4 V ± 0,5 V | |
| Starting voltage | > 11,4 V ± 0,5 V | |
| Nominal Power | max. 60 W | |
| Standy current | typ. (30 ± 10) mA | |
| Charging current: | 1,6 ± 0,2 Ampere | |
| Trickle charging NiMH batteries | 5 mA ÷ 15mA | |
| Trickle charging Li-Ion batteries | no current | |
| Batterie nominal voltage | 14,4 V ÷ 25,2 V | |
| Appliance class | II | |
| Protection | IP 30 | |
| Dimensions | 152 x 86 x 76 mm | |
| Weight | max. 500 g | |
