AM-TANK 250gl Diesel

Shipping not included 

Skid-mounted vertical cylindrical Diesel tanks manufactured made of carbon steel queality S235JR, watertight electro-welded (submerged arc welding process), provided with anti-roll supports, primed with a rust preventing layer and finished with a layer of white paint. Tanks are delivered pressure-tested and ready-to-use (plug-and-play).

Tanks are equipped with:
▪ Ø 16″ (400mm) manhole complete with oil gasket and tight bolted cover.
▪ 3″ lockable filling quick cap.
▪ Mechanical overfill prevention valve calibrated to interrupt the fuel flow at 90% of the tank’s geometric capacity.
▪ Vent device with flame arrestor mesh.
▪ Mechanical float operated tank contents gauge with planetary gear, adjustable scale in cm.
▪ Tank drainage point provided with a safety cap for routine maintenance and cleaning.
▪ Suction point equipped with check valve, strainer and ball valve.
▪ Equipotential grounding point.
▪ Containment dike complete with lifting plates, grounding connection point, drain plug for routine maintenance / cleaning and N.4 housings suitable for fixing the uprights of the roof system.

Fuel Transfer Unit CUBE56:
▪ 15 GPM Diesel Transfer Pump (120V / 60Hz, 650 Watt, 7.5 Amp, Duty Cycle: 20 minutes On/Off, 3450 RPM, 48.5 lbs, IP55 rated).
▪ 3-Digit Mechanical Meter (in gal).
▪ 13 ft. of dispensing hose.
▪ A60 Auto-nozzle.

Features:
▪ Nominal capacity: 258 gal / 980 lt.
▪ Tank total length (including containment dike): 4,59 ft / 1,40 m.
▪ Tank total width (including containment dike): 3,44 ft / 1,05 m.
▪ Tank total height (including fuel transfer unit): 5,61 ft / 1,71 m.
▪ Tank total weight: 1058 lbs / 240 kg.